FixVault
Home › Lexus › 2008 › IS F › Repair and Diagnosis › Body & Frame › Door Locks › Theft Deterrent / Keyless Entry › Certification Ecu › Installation

Certification Ecu: Installation

  1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) 
    1. Install the certification ECU (smart key ECU assembly) with the 2 nuts.
    2. Connect the connector.
    Fig 1: Identifying Certification ECU And Nuts
    G05754590Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL SIDE LUGGAGE COMPARTMENT TRIM COVER  (See INSTALLATION )
  3. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK  (See INSTALLATION )
  4. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER  (See INSTALLATION )
  5. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK  (See INSTALLATION )
  6. INSTALL ROPE HOOK  (See INSTALLATION )
  7. INSTALL NO. 2 ROOM LIGHT ASSEMBLY  (See INSTALLATION )
  8. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER  (See INSTALLATION )
  9. INSTALL ROPE HOOK ASSEMBLY  (See INSTALLATION )
  10. INSTALL DECK SIDE TRIM BOX RH 
  11. INSTALL DECK SIDE TRIM BOX LH 
  12. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER 
  13. REGISTER ECU COMMUNICATION ID 
    NOTE: When replacing the certification ECU (smart key ECU assembly), perform initialization (See REGISTRATION  ).
  14. REGISTER KEY 
    NOTE: When replacing the certification ECU (smart key ECU assembly), perform initialization (See REGISTRATION  ).
About FixVault