FixVault
Home › Lexus › 2008 › IS F › Repair and Diagnosis › Body & Frame › Door Locks › Theft Deterrent / Keyless Entry › Entry Lock And Unlock Switch › Inspection

Entry Lock And Unlock Switch: Inspection

  1. INSPECT FRONT DOOR OUTSIDE HANDLE ASSEMBLY LH 
    1. Measure the resistance according to the value (s) in the table below

      Standard Resistance 

      RESISTANCE REFERENCE

      Tester Connection (Symbols) Condition Specified Condition
      1 (TRG-) - 3 (TRG+) Lock switch not pushed 10 kΩ or higher
      1 (TRG-) - 3 (TRG+) Lock switch pushed Below 1 Ω

      If the result is not specified, replace the front door outside handle assembly LH

      Fig 1: Inspecting Front Door Outside Handle Assembly LH
      G05754373Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT FRONT DOOR OUTSIDE HANDLE ASSEMBLY RH 
    1. Measure the resistance according to the value (s) in the table below

      Standard Resistance 

      RESISTANCE REFERENCE

      Tester Connection (Symbols) Condition Specified Condition
      1 (TRG-) - 3 (TRG+) Lock switch not pushed 10 kΩ or higher
      1 (TRG-) - 3 (TRG+) Lock switch pushed Below 1 Ω

      If the result is not specified, replace the front door outside handle assembly RH

      Fig 2: Inspecting Front Door Outside Handle Assembly RH
      G05754377Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault