FixVault
Home › Lexus › 2008 › IS F › Repair and Diagnosis › Body & Frame › Door Locks › Theft Deterrent / Keyless Entry › Theft Deterrent System › Customize Parameters

Customize Parameters

HINT:

The following items can be customized.

NOTE:
  • After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
  • Be sure to record the current settings before customization.
  • When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the system, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).
  1. CUSTOMIZE 
    1. Connect the Techstream to the DLC3
    2. Turn the engine switch on (IG)
    3. Turn the Techstream on
    4. Enter the following menus Customize setting
    5. Select the setting by referring to the table below

      Security 

      SECURITY REFERENCE CHART

      Display (Item) Default Content Setting
      Passive Mode OFF PASSIVE MODE is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after the key is no longer in the actuation area and the driver side door is closed, even if the doors are not locked by wireless or door key lock operation In PASSIVE MODE, if you do not perform following operations within 14 seconds after the door is opened during armed state, theft deterrent system will judge that condition as a theft and switch to alarm sounding state
      • Unlock any door by key or wireless operation
      • Turn the engine switch on (IG)
      		 ON/OFF
      Warning by Horn ON Function that makes vehicle horn and theft deterrent horn to be used as a warning device ON/OFF
      Entry Delay Time 14 s Function that changes entry delay time (time before warning starts) for PASSIVE MODE 0 s/14 s/30 s
About FixVault