Front Bumper: Installation

INSTALL FRONT BUMPER ASSEMBLY
1. Connect the 2 fog light connectors
2. w/ Intuitive Parking Assist system
  1. Connect the ultrasonic sensor connector
3. w/ headlight cleaner system.
  1. Connect the headlight cleaner hose to the windshield washer jar and pump assembly
4. Engage the 10 claws and install the front bumper assembly.
  
  Fig 1: Locating Front Bumper Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Install the 2 clips and screw
  
  Fig 2: Identifying Front Bumper Assembly Clips And Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Install the 8 screws
  
  Fig 3: Identifying Front Bumper Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. Install the screw
  HINT:
  
  Use the same procedure for the RH side and LH side.
  
  Fig 4: Identifying Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
8. Install the 2 pin hold clips.
  HINT
  
  Use the same procedure for the RH side and LH side
  
  Fig 5: Identifying Pin Hold Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR GRILLE PROTECTOR
1. Install the 2 radiator grille protectors.
  
  Fig 6: Identifying Radiator Grille Protectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL COOL AIR INTAKE DUCT SEAL
1. Install the cool air intake duct seal with the 9 clips.
Fig 7: Identifying Cool Air Intake Duct Seal Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ADD WASHER FLUID (w/ Headlight Cleaner System) (See INSTALLATION )
VEHICLE PREPARATION FOR FOG LIGHT AIMING (See ADJUSTMENT )
PREPARATION FOR FOG LIGHT AIMING (See ADJUSTMENT )
INSPECT FOG LIGHT AIMING (See ADJUSTMENT )
ADJUST FOG LIGHT AIMING (See ADJUSTMENT )