FixVault
Home › Lexus › 2008 › IS F › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Cooling › Thermostat › Installation

Cooling System (Mechanical): Cooling: Thermostat: Installation

  1. INSTALL WATER INLET SUB-ASSEMBLY WITH THERMOSTAT 
    1. Install a new gasket and the water inlet sub-assembly with thermostat with the 3 nuts

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

    Fig 1: Locating Water Inlet Sub-Assembly Nuts
    G04948176Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. CONNECT NO. 2 RADIATOR HOSE  (See INSTALLATION )
  3. ADD ENGINE COOLANT  (See REPLACEMENT )
  4. INSPECT FOR COOLANT LEAK  (See COOLING SYSTEM )
  5. INSTALL NO. 1 AIR CLEANER INLET  (See INSTALLATION )
  6. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  7. INSTALL ENGINE UNDER COVER 
About FixVault