FixVault
Home › Lexus › 2008 › IS F › Repair and Diagnosis › Engine Mechanical › Lubrication System › Lubrication › Engine Oil Cooler › Removal

Engine Oil Cooler: Removal

  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE ENGINE UNDER COVER 
  3. DRAIN ENGINE OIL  (See OIL AND OIL FILTER )
  4. DRAIN ENGINE COOLANT  (See COOLANT )
  5. REMOVE ENGINE OIL COOLER 
    1. Disconnect the 2 water by-pass hoses.
      Fig 1: Locating Water By-Pass Hoses
      G05750487Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt, gasket, union bolt, oil cooler, and O-ring.
    Fig 2: Identifying Bolt, Gasket, Union Bolt And Oil Cooler
    G05750488Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault