FixVault
Home › Lexus › 2008 › LS 460 › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Door Control Switch › Inspection

Door Control Switch: Inspection

  1. INSPECT DOOR CONTROL SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      STANDARD RESISTANCE

      Tester Connection Switch Condition Specified Condition
      2 (L) - 3 (E) Lock Below 1 Ω
      2 (L) - 3 (E) 4 (UL) - 3 (E) OFF 10 kΩ or higher
      4 (UL) - 3 (E) Unlock Below 1 Ω

      If the result is not as specified, replace the control switch.

      Fig 1: Identifying Door Control Switch Connector Terminals
      G04951727Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. When terminal 5 (ILL+) of the connector is connected to the positive (+) battery terminal and terminal 3 (E) is connected to the negative (-) battery terminal, check that the indicator (LED) illuminates.
      Fig 2: Identifying Door Control Switch Connector Terminals
      G04951728Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault