Navigation Check Mode

HINT:

• This mode displays GPS satellite information.
• Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown the same as on the actual vehicle.

1. ENTER DIAGNOSTIC MODE  (See DTC CHECK / CLEAR  )
2. NAVIGATION CHECK 
   1. Select "Navigation Check" from the "Diagnosis Menu" screen.
      Fig 1: Diagnosis Menu - Screen Display

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. GPS INFORMATION 
   1. Select "GPS Information" from the "Navigation check" screen.
      Fig 2: Navigation Check - Screen Display

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. When GPS information is displayed, check the GPS conditions.

      HINT:

      • This screen is updated once per second when input signals to the vehicle are changed.
      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION (see NAVIGATION CHECK MODE  ).
        Fig 3: GPS Information - Screen Display

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. VEHICLE SENSORS 
   1. Select "Vehicle Sensors" from the "Navigation check" screen.
      Fig 4: Navigation Check - Screen Display

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Check all the signals and sensors when vehicle signal information is displayed.

      HINT:

      • This screen is updated once per second when input signals to the vehicle are changed.
      • This screen displays vehicle signals input to the navigation ECU.
      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION (see NAVIGATION CHECK MODE  ).
        Fig 5: Vehicle Sensors - Screen Display

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. COLOR BAR CHECK 
   1. Select "Color Bar Check" from the "Navigation check" screen.
      Fig 6: Navigation Check - Screen Display

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Check each color of the color bar when the "NAVI Color Bar Check" screen is displayed.

      HINT:

      • Colors will not be displayed full-screen as in "Display Check Mode".
      • This screen displays the navigation ECU display color.
        Fig 7: NAVI Color Bar Check - Screen Display

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. MEMORY COPY/PASTE CHECK 
   1. Select "Memory Copy/Paste" from "Navigation check" screen.
      Fig 8: Navigation Check - Screen Display

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. HDD memory can be copied or pasted.
      Fig 9: Memory Copy/Paste - Screen Display

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. PARTS INFORMATION 
   1. Select "Parts Information" from the "Navigation check" screen.
      Fig 10: Navigation Check - Screen Display

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Check the navigation and disc information when the "Parts Information" screen is displayed.
      Fig 11: Parts Information - Screen Display

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Screen description: 

      DISPLAY CONTENTS CHART
      
      

      Display	Contents
      Navigation Manufacturer/*	Navigation ECU manufacturer is displayed.
      Navigation Version/*2	Navigation ECU version is displayed.
      Disc Manufacturer/*3	Map disc manufacturer is displayed.
      Disc Version/*4	Map disc version is displayed.

8. MIC & VOICE RECOGNITION CHECK 
   1. Select "Mic & Voice Recognition Check" on the "Navigation check" screen to display the "MICROPHONE & VOICE RECOGNITION CHECK" screen.
      Fig 12: Navigation Check - Screen Display

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. When a voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
   3. Push the recording switch and perform voice recording.
   4. Check that the recording indicator remains on while recording and that the recorded voice is played normally.

      HINT:

      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION (see NAVIGATION CHECK MODE  ).
      • This function is controlled by the navigation ECU.
        Fig 13: Microphone And Voice Recognition Check - Screen Display

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
9. HDD INFORMATION 
   1. Select "HDD Information" from the "Navigation check" screen.
      Fig 14: Navigation Check - Screen Display

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Check for DTCs.

      HINT:

      • This is the HDD check function in the display and navigation assembly.
      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION (see NAVIGATION CHECK MODE  ).
        Fig 15: HDD Information - Screen Display

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
10. AVC-LAN PLUS CHECK 
    1. Select "AVC-LAN plus Check" from the "Navigation check" screen.
       Fig 16: Navigation Check - Screen Display

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check the AVC-LAN plus check result.

       HINT:

       • This is the AVC-LAN plus check function in the display and navigation assembly.
       • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION (see NAVIGATION CHECK MODE  ).
         Fig 17: AVC-LAN Plus Check - Screen Display

         Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
11. SOUND LIBRARY INFORMATION 
    1. Select "Sound Library" from the "Navigation check" screen.
       Fig 18: Navigation Check - Screen Display

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check the sound library data.

       HINT:

       • This is the sound library information function in the display and navigation assembly.
       • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION (see NAVIGATION CHECK MODE  ).
         Fig 19: Sound Library - Screen Display

         Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002