Rocker Panel Moulding: Installation

HINT:

Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.

INSTALL ROCKER PANEL MOULDING LH
1. for Standard Body:
  Attach the 10 clips to install the moulding.
  
  Fig 1: Locating Rocker Panel Moulding Clips - For Standard Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. for Long Body:
  Attach the 11 clips to install the moulding.
  
  Fig 2: Locating Rocker Panel Moulding Clips - For Long Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 2 screws.
  
  Fig 3: Identifying Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. for Standard Body: Install the 7 clips.
  
  Fig 4: Identifying Clips - For Standard Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. for Long Body: Install the 8 clips.
  
  Fig 5: Identifying Clips - For Long Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Install the screw on the rear side.
  
  Fig 6: Identifying Screw On Rear Side
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. Install the screw on the front side.
  
  Fig 7: Identifying Screw On Front Side
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT DOOR NO. 3 WEATHERSTRIP LH
1. for Standard Body:
  Attach the 12 clips to install the weatherstrip.
  
  Fig 8: Identifying Weatherstrip Clips - For Standard Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. for Long Body:
  Attach the 13 clips to install the weatherstrip.
  
  Fig 9: Identifying Weatherstrip Clips - For Long Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 6 ROCKER PANEL MOULDING PROTECTOR
1. Install the protector with the 2 clips and screw.
INSTALL QUARTER PANEL WHEEL OPENING MOULDING LH (See REMOVAL )
INSTALL FRONT FENDER WHEEL OPENING MOULDING LH (See REMOVAL )