FixVault
Home › Lexus › 2008 › LS 460L › Repair and Diagnosis › Suspension › Suspension Control Systems › ABSORBER CONTROL ACTUATOR (for Front Side) › Inspection

ABSORBER CONTROL ACTUATOR (for Front Side): Inspection

  1. INSPECT ABSORBER CONTROL ACTUATOR 
    1. Measure the resistance according to the value (s) in the table below.

    Standard resistance 

    TESTER CONNECTION SPECIFIED CONDITION TABLE

    Tester Connection Condition Specified Condition
    1 (B+) - 3 (GND) Always 12.0 to 12.8 Ω
    2 (A*) - 3 (GND) Always
    4 (B-) - 3 (GND) Always
    5 (A-) - 3 (GND) Always
  2. CHECK ABSORBER CONTROL ACTUATOR OPERATION 
    1. Check the absorber control actuator operation (see OPERATION CHECK  ).
    Fig 1: Identifying Absorber Control Actuator Connector Terminals
    G04944134Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault