FixVault
Home › Lexus › 2008 › LS 600hL › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control › Millimeter Wave Radar Sensor › Removal

Millimeter Wave Radar Sensor: Removal

  1. REMOVE ENGINE ROOM SIDE COVER LH  (See REMOVAL ).
  2. REMOVE ENGINE ROOM SIDE COVER RH  (See REMOVAL ).
  3. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY  (See REMOVAL ).
  4. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL ).
  5. REMOVE RADIATOR GRILLE ASSEMBLY  (See DISASSEMBLY ).
  6. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY 
    1. Disconnect the sensor connector
    2. Remove the 3 bolts and sensor
    Fig 1: Locating Sensor Connector Bolts
    G05776083Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault