FixVault
Home › Lexus › 2008 › LS 600hL › Repair and Diagnosis › Accessories & Equipment › Infotainment › Navigation › Navigation Antenna › Installation

Navigation Antenna: Installation

  1. INSTALL NAVIGATION ANTENNA ASSEMBLY (for HDD) 
    1. Install the antenna with the 2 screws.
    2. Attach the 2 clamps.
      Fig 1: Locating Antenna Screws (HDD)
      G05784419Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NAVIGATION ANTENNA ASSEMBLY (for DVD) 
    Fig 2: Locating Antenna Screws (DVD)
    G05784418Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the antenna with the 2 screws.
    2. Attach the 4 clamps.
  3. INSTALL NO. 3 HEATER TO REGISTER DUCT  (See REASSEMBLY )
  4. INSTALL DEFROSTER NOZZLE ASSEMBLY  (See INSTALLATION )
  5. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT  (See REASSEMBLY )
  6. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 
    1. Install the instrument panel safety pad (See INSTALLATION ).
  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
  8. INSTALL BATTERY SERVICE HOLE COVER LH  (See INSTALLATION )
  9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  (See INSTALLATION )
  10. INSPECT STEERING PAD  (See REMOVAL )
  11. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM )
About FixVault