Rocker Panel Moulding: Installation

HINT.

• Use the same procedures for the RH side and LH side
• The procedures listed below are for the LH side.

1. INSTALL ROCKER PANEL MOULDING LH 
   1. Attach the 11 clips to install the moulding
      Fig 1: Identifying Moulding Clips

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Install the 2 screws
      Fig 2: Identifying Moulding Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Install the 8 clips.
      Fig 3: Identifying Rocker Panel Clips

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   4. Install the screw on the rear side.
      Fig 4: Identifying Rear Side Screw

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   5. Install the screw on the front side.
   Fig 5: Identifying Front Side Screw

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL REAR NO. 3 DOOR WEATHERSTRIP LH 
   1. Attach the 13 clips to install the weatherstrip.
   Fig 6: Identifying Weatherstrip Clips

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL NO. 6 ROCKER PANEL MOULDING PROTECTOR 
   1. Install the protector with the 2 clips and screw.
   Fig 7: Identifying No. 6 Rocker Panel Moulding Protector And Screws
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. INSTALL QUARTER PANEL WHEEL OPENING MOULDING LH  (See INSTALLATION  )
5. INSTALL FRONT FENDER WHEEL OPENING MOULDING LH  (See INSTALLATION  )