Customize Parameters

CUSTOMIZING FUNCTION WITH Intelligent tester OR TECHSTREAM (REFERENCE)

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the Intelligent tester or Techstream to the DLC3.
Turn the power switch ON (IG)
Turn the tester on
Enter the following menus
1. Intelligent tester - Select CUSTOMIZE /
2. Techstream - Select Customize Setting /

Select the setting by referring to the table below.

Intelligent tester

OTHERS

SYSTEM SETTING REFERENCE

System	Default	Contents	Setting
R-SHADE DELAY T	07s	Function to adjust reverse-linked sunshade lowering function's response time	07S/1 2s/09s/00s
R-SHADE REVERSE	AVAIL	Reverse linked function	AVAIL or NOT AVL

Techstream

Others

SYSTEM SETTING REFERENCE

System	Default	Contents	Setting
Rear Shade Delay Time	07s	Function to adjust reverse-linked sunshade lowering function's response time	07s/12s/09s/00s
R-pos to Rear Sun Shade COM	ON	Reverse linked function	ON or OFF