Battery Blower: Installation

INSTALL NO. 1 HV BATTERY INTAKE DUCT
1. Install the No 1 HV battery intake duct to the battery cooling blower assembly.
  
  Fig 1: Identifying No. 1 HV Battery Intake Duct
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL BATTERY COOLING BLOWER ASSEMBLY
1. Install the battery cooling blower assembly with the 3 nuts and clip.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
2. Install the 2 connectors to the battery cooling blower assembly
  
  Fig 2: Locating Battery Cooling Blower Assembly And Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 HV BATTERY INTAKE DUCT
1. Install the No 2 HV battery intake duct.
  
  Fig 3: Identifying No. 2 HV Battery Intake Duct
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 3 HV BATTERY INTAKE DUCT
1. Install the No 3 HV battery intake duct with the clip.
INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH (See INSTALLATION )
INSTALL REAR FLOOR FINISH PLATE (See INSTALLATION )
INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (See INSTALLATION )

Fig 4: Locating HV Battery Intake Duct Clip
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (See INSTALLATION )
INSTALL DECK TRIM SIDE BOARD RH (See INSTALLATION )
INSTALL ROPE HOOK ASSEMBLY (See INSTALLATION )
INSTALL ROPE HOOK (See INSTALLATION )
INSTALL NO. 1 COOLER COVER (w/ Rear Cooler) (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (See INSTALLATION )