FixVault
Home › Lexus › 2008 › LS 600hL › Repair and Diagnosis › Restraints › Air Bag, SRS › Pre-Collision › Driver Monitor Ecu › Installation

Driver Monitor Ecu: Installation

  1. INSTALL DRIVER MONITOR ECU 
    1. Install the ECU with the 2 nuts.
      Fig 1: Identifying Driver Monitor ECU Nuts
      G05775773Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the ECU with the 2 nuts
    3. Connect the connectors
  2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See INSTALLATION )
  3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY  (See INSTALLATION )
    Fig 2: Locating Driver Monitor ECU Connectors And Nuts
    G04950920Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
  5. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING  (See INSTALLATION )
  6. INSTALL INSTRUMENT SIDE PANEL LH  (See INSTALLATION )
  7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
About FixVault