Millimeter Wave Radar Sensor: Installation

INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
1. Install the sensor with the 3 bolts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
2. Connect the sensor connector.
  NOTE: Do not use a sensor which has been dropped or subjected to any strong shocks.
  
  Fig 1: Identifying Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR GRILLE ASSEMBLY (See INSTALLATION )
INSTALL UPPER RADIATOR SUPPORT SEAL (See INSTALLATION )
INSTALL ENGINE ROOM SIDE COVER RH (See INSTALLATION )
INSTALL ENGINE ROOM SIDE COVER LH (See INSTALLATION )
ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY (See ADJUSTMENT )
PERFORM DRIVE TEST (See ADJUSTMENT )