Inspection Procedure

HINT:

After the inspection is completed, clear the DTCs (See DTC CHECK / CLEAR  ).

1. CLEAR DTC 
   1. Clear the DTCs (See DTC CHECK / CLEAR  ).
2. RECHECK DTC 
   1. Recheck for DTCs and check if the same trouble code is output.

      OK: No DTC is output. 

   NG: REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY  (See REMOVAL  )

   OK: Go to Next Step 

3. PLAY MUSIC 
   1. Check if music can be played.

      OK: Can be played. 

   NG: REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY  (See REMOVAL  )

   OK: USE SIMULATION METHOD TO CHECK  (See ELECTRONIC CIRCUIT INSPECTION PROCEDURE )