FixVault
Home › Lexus › 2008 › LX 570 › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Door Control Receiver › Installation

Door Control Receiver: Installation

  1. INSTALL DOOR CONTROL RECEIVER 
    Fig 1: Locating Bolt And Receiver
    G05765377Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the receiver with the bolt.

      Torque: 15 N*m (153 kgf*cm, 11 ft.*lbf) 

    2. Connect the connector.
  2. INSTALL REAR UPPER PILLAR GARNISH RH  (See INSTALLATION )
  3. INSTALL BACK DOOR SERVICE HOLE COVER RH  (See REASSEMBLY )
  4. INSTALL BACK DOOR SIDE GARNISH RH  (See REASSEMBLY )
  5. INSTALL CENTER BACK DOOR GARNISH  (See REASSEMBLY )
  6. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH  (See INSTALLATION )
  7. INSTALL REAR SEAT COVER CAP  (See INSTALLATION )
  8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK  (See INSTALLATION )
  9. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE  (See INSTALLATION )
  10. INSTALL REAR DOOR SCUFF PLATE RH  (See INSTALLATION )
  11. INSTALL REAR STEP COVER  (See INSTALLATION )
  12. INSTALL REAR NO. 2 SEAT ASSEMBLY RH 
    1. Install the rear No. 2 seat RH (See INSTALLATION ).
About FixVault