FixVault
Home › Lexus › 2008 › LX 570 › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Door Control Receiver › Removal

Door Control Receiver: Removal

  1. REMOVE REAR NO. 2 SEAT ASSEMBLY RH 
    1. Remove the rear No. 2 seat RH (See REMOVAL ).
  2. REMOVE REAR STEP COVER  (See REMOVAL )
  3. REMOVE REAR DOOR SCUFF PLATE RH  (See REMOVAL )
  4. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE  (See REMOVAL )
  5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK  (See REMOVAL )
  6. REMOVE REAR SEAT COVER CAP  (See REMOVAL )
  7. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH  (See REMOVAL )
  8. REMOVE CENTER BACK DOOR GARNISH  (See DISASSEMBLY )
  9. REMOVE BACK DOOR SIDE GARNISH RH  (See DISASSEMBLY )
  10. REMOVE BACK DOOR SERVICE HOLE COVER RH  (See DISASSEMBLY )
  11. REMOVE REAR UPPER PILLAR GARNISH RH  (See REMOVAL )
  12. REMOVE DOOR CONTROL RECEIVER 
    1. Disconnect the connector.
    2. Remove the bolt and receiver.
    Fig 1: Locating Bolt And Receiver
    G05765377Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault