FixVault
Home › Lexus › 2008 › LX 570 › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel › Fuel Sender Gauge Assembly › Removal

Fuel Sender Gauge Assembly: Removal

  1. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY 
    1. Remove the fuel suction with pump and gauge tube assembly (See REMOVAL  ).
  2. REMOVE FUEL SENDER GAUGE ASSEMBLY 
    1. Disconnect the fuel sender gauge connector.
      Fig 1: Disconnecting Fuel Sender Gauge Connector
      G05759645Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Press down on the sender gauge claw labeled A. Then slide the sender gauge upward to remove it.
      Fig 2: Pressing Down On Sender Gauge Claw Labeled
      G05628935Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault