Accelerator Pedal: Installation

INSTALL ACCELERATOR PEDAL ASSEMBLY
NOTE:
- Avoid physical shocks to the accelerator pedal assembly.
- Do not disassemble the accelerator pedal assembly.
1. Install the accelerator pedal with the 2 nuts.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
2. Connect the accelerator pedal position sensor connector.
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See INSTALLATION )

Fig 1: Locating Accelerator Pedal Nuts And Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002