Active Height Control Pump And Motor: Disassembly

REMOVE HEIGHT CONTROL HOSE ASSEMBLY
1. Disconnect the clamp from the reservoir, then remove the 2 clips and hose.
Fig 1: Locating Height Control Hose And Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE HEIGHT CONTROL CAP TO RESERVOIR HOSE
1. Remove the 3 clips, 2 breather plugs and hose from the reservoir hose.
  
  Fig 2: Identifying Clips, Breather Plugs And Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Pull the connector down to detach it and remove the hose from the reservoir tank.
Fig 3: Pulling Connector Down
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DISCONNECT NO. 4 FRAME WIRE
1. Disconnect the 2 connectors, clamp and frame wire.
Fig 4: Locating Connectors, Clamp And Frame Wire
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE HEIGHT CONTROL COMPRESSOR BRACKET ASSEMBLY
1. Remove the 3 nuts and bracket from the pump and motor.
Fig 5: Locating Height Control Compressor Bracket And Nuts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE HEIGHT CONTROL RESERVOIR ASSEMBLY
1. Using a 5 mm hexagon wrench, remove the 5 bolts and reservoir from the pump and motor.
REMOVE NO. 1 HEIGHT CONTROL BOLT CUSHION
1. Remove the 3 bolt holders and 3 bolt cushions from the pump and motor.