FixVault
Home › Lexus › 2008 › RX 400h AWD › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Audio/Visual › Stereo Component Amplifier › Installation

Stereo Component Amplifier: Installation

  1. INSTALL STEREO COMPONENT AMPLIFIER (w/ Front Center Speaker) 
    1. Install the No. 2 amplifier bracket with the 2 bolts.
      Fig 1: Locating No. 2 Amplifier Bracket Bolts
      G05270678Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the No. 1 amplifier bracket with the 2 bolts.
      Fig 2: Locating No. 1 Amplifier Bracket Bolts
      G05270677Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect each connector.
    4. Install the stereo component amplifier with the 2 bolts and the nut.
      Fig 3: Locating Stereo Component Amplifier Bolts And Nut (w/ Front Center Speaker)
      G05270676Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL STEREO COMPONENT AMPLIFIER (w/o Front Center Speaker) 
    1. Connect each connector.
    2. Install the stereo component amplifier with the 2 bolts and the nut.
      Fig 4: Locating Stereo Component Amplifier Bolts And Nut (w/o Front Center Speaker)
      G05270682Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY 
    1. Install the 3 bolts.
      Fig 5: Locating Rear Seat Sub Floor Panel Assembly Bolts
      G05270674Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the rear seat sub floor panel assembly with the 3 nuts.
    Fig 6: Identifying Rear Seat Sub Floor Panel Assembly Nuts
    G05270673Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL SIDE DECK TRIM PANEL ASSEMBLY LH  (See INSTALLATION )
  5. INSTALL SIDE DECK TRIM PANEL ASSEMBLY RH 
  6. INSTALL ROPE HOOK  (See INSTALLATION )
  7. INSTALL REAR SEAT SIDE COVER LH  (See INSTALLATION )
  8. INSTALL REAR DOOR SCUFF PLATE LH  (See INSTALLATION )
  9. INSTALL REAR SEAT SIDE COVER RH 
  10. INSTALL REAR DOOR SCUFF PLATE RH 
  11. INSTALL SIDE DECK TRIM COVER LH  (See INSTALLATION )
  12. INSTALL SIDE DECK TRIM COVER RH 
  13. INSTALL REAR FLOOR FINISH SIDE PLATE LH  (See INSTALLATION )
  14. INSTALL REAR FLOOR FINISH SIDE PLATE RH 
  15. INSTALL SIDE DECK TRIM BOX LH  (See INSTALLATION )
  16. INSTALL SIDE DECK TRIM BOX RH 
  17. INSTALL REAR FLOOR FINISH PLATE  (See INSTALLATION )
  18. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY  (See INSTALLATION )
  19. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY  (See INSTALLATION )
  20. INSTALL REAR DECK FLOOR BOX  (See INSTALLATION )
  21. INSTALL FRONT DECK FLOOR BOX  (See INSTALLATION )
  22. INSTALL JACK CARRIER ASSEMBLY  (See INSTALLATION )
  23. INSTALL DECK BOARD SUB-ASSEMBLY  (See INSTALLATION )
  24. INSTALL TONNEAU COVER ASSEMBLY 
  25. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  26. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).
About FixVault