Cooling System (Mechanical): Cooling: Radiator: Installation

INSTALL NO. 2 RADIATOR ASSEMBLY
1. Attach the radiator from the upper part.
  NOTE: Do not allow the cooler condenser and radiator to come into contact with each other.
  
  Fig 1: Attaching Radiator From Upper Part
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the radiator and radiator support lowers with the 4 bolts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
  
  Fig 2: Locating Radiator Support Lowers With Bolts (LH)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Fig 3: Locating Radiator Support Lowers With Bolts (RH)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR SUPPORT SUB-ASSEMBLY LH
1. Install the radiator support LH with the 3 bolts.
  Torque: Bolt A
  
  5.0 N*m (51 kgf*cm, 44 in.*lbf)
  
  Bolt B
  
  3.9 N*m (40 kgf*cm, 35 in.*lbf)
  
  Fig 4: Locating Radiator Support LH With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR SUPPORT SUB-ASSEMBLY RH
1. Install the 3 bolts and radiator support RH with the 3 bolts.
  Torque: Bolt A
  
  5.0 N*m (51 kgf*cm, 44 in.*lbf)
  
  Bolt B
  
  3.9 N*m (40 kgf*cm, 35 in.*lbf)
  
  Fig 5: Locating Radiator Support RH With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR SUPPORT CUSHION
1. Install the 2 radiator support cushions to the radiator supports.
  
  Fig 6: Locating Radiator Support Cushions
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FAN SHROUD
1. Install the 4 bolts and fan shroud to the radiator with the 4 bolts.
  Torque: 7.8 N*m (80 kgf*cm, 69 ft.*lbf)
  
  Fig 7: Locating Fan Shroud Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the radiator reserve tank hose.
  
  Fig 8: Locating Cooling Fan ECU Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR SUPPORT SUB-ASSEMBLY UPPER
1. Install the radiator support upper with the 5 bolts.
  Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf)
  
  NOTE: Secure the upper member with the retaining claws of the radiator upper support.
2. Connect the horn connector.
3. Install the suction tube bracket with the bolt.
  Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
  
  Fig 9: Locating Radiator Support Upper With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HOOD LOCK ASSEMBLY
1. Install the hood lock assembly with the 2 bolts and nut.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Fig 10: Locating Hood Lock Nuts And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Attach the claws and install the hood lock control cable cover.
3. Install the 2 screws.
  
  Fig 11: Locating Hood Lock Control Cable Cover Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR HOSE INLET
1. Install the radiator hose inlet to the No. 2 radiator assembly.
  
  Fig 12: Locating Radiator Hose Inlet
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR HOSE OUTLET
1. Install the radiator hose outlet to the No.2 radiator assembly .
Fig 13: Locating Radiator Hose Outlet
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CLEANER CAP W/INLET (See INSTALLATION )
INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )
ADJUST HOOD LOCK ASSEMBLY (See ADJUSTMENT )
ADD COOLANT (for Engine) (See ON-VEHICLE INSPECTION )
INSPECT FOR COOLANT LEAK (for Engine) (See ON-VEHICLE INSPECTION )