FixVault
Home › Lexus › 2008 › RX 400h AWD › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel › Fuel Sender Gauge Assembly › Inspection

Fuel Sender Gauge Assembly: Inspection

  1. INSPECT FUEL SENDER GAUGE ASSEMBLY 
    1. Remove the fuel sender gauge assembly.
    2. Check the operation of the float moving smoothly between F and E.
    3. Disconnect the fuel sender gauge connector.
    4. Measure the resistance between the terminals 1 (FE) and 2 (FS) of connector according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Float Level Resistance (Ω)
      F 13.5 to 16.5
      E 405.5 to 414.5

      HINT:

      If the value is not as specified, replace the fuel sender gauge assembly.

      Fig 1: Inspecting Fuel Sender Gauge Assembly
      G05204546Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault