Front Circuit Breaker Sensor: Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
2. REMOVE ENGINE ROOM SIDE LH COVER NO. 2  (See REMOVAL )
3. REMOVE AIR CLEANER CAP W/INLET  (See REMOVAL )
4. REMOVE CIRCUIT BREAKER SENSOR NO. 1 
   1. Move the outer section to the wire harness side as illustrated, then disconnect the circuit breaker sensor No. 1.
      Fig 1: Moving Outer Section To Wire Harness Side

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the 2 bolts and circuit breaker sensor No. 1 from the w/ converter inverter assembly.

Fig 2: Locating Circuit Breaker Sensor No. 1 And Bolts

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002