FixVault
Home › Lexus › 2008 › RX 400h FWD › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control › Dynamic Laser Cruise Control System › DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to the ON position.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Laser Cruise / Trouble Codes.
    5. Check the details of the DTC(s) (See DIAGNOSTIC TROUBLE CODE CHART ).
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. (b)Turn the ignition switch to the ON position.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Laser Cruise / Trouble Codes.
    5. Clear the DTCs.
About FixVault