Headlight Assembly: Installation

HINT:

• The procedures listed below are for the LH side.
• Use the same procedures for the RH and LH side.
  Fig 1: Installing Headlight Socket Cover

  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. INSTALL HEADLIGHT ASSEMBLY 
   1. Connect the connector.
   2. Install the unit with the 2 bolts, nut and clip.
   Fig 2: Identifying Headlight Assembly Bolts, Nut And Clip

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL FRONT BUMPER ENERGY ABSORBER 
3. INSTALL FRONT BUMPER COVER  (See INSTALLATION )
4. INSTALL FRONT FENDER LINER LH  (See INSTALLATION )
5. INSTALL FRONT FENDER LINER RH  (See INSTALLATION )
6. INSTALL RADIATOR GRILLE  (See INSTALLATION )
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
8. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
9. ADJUST HEADLIGHT AIMING (See  ADJUSTMENT   )