Customize Parameters

HINT:

The followings are the possible items to be customized.

NOTE:

After confirming whether the items of the customer's request is applicable or not for the customized items, perform the customize operation.
Be sure to record the current value before customizing.
In case of performing the troubleshooting, pay attention as there is a possibility that the function is OFF by customizing. (Example: In case of the symptom in which "The wireless operation does not function", check that the wireless operation is not OFF by customizing, then perform the troubleshooting.)

Illuminated Entry

ILLUMINATED ENTRY CUSTOMIZE PARAMETERS

Display	Default	Contents	Setting
Lighting Time	15 sec.	To change the lighting time after closing the door. (It will quickly fade out in case of turning the ignition switch ON)	7.5 sec. /15 sec. / 30 sec.
Illumination System with ACC OFF	Available	Function to light the interior light when the ignition switch is operated from ON to OFF	Available / Not Available

HINT:

Sensitivity adjustment can hardly be confirmed. Check by driving the customer's vehicle.

Light Control

LIGHT CONTROL CUSTOMIZE PARAMETERS

Display	Default	Contents	Setting
Sensitivity	NORMAL	To adjust the sensitivity of the lighting illumination.*1	LIGHT2 / LIGHT1 / NORMAL / DARK1/DARK2
Control Type	CRNT	To change the control logic when the light control switch is AUTO position. Refer to the illustration *2.	CRNT/OLD
Light Auto OFF Delay	30s	Function to keep on lighting the headlight for a certain period of time after closing all the doors with the ignition switch turned from ON to OFF under the condition that the light control switch is at HEAD or AUTO with the headlight ON.	OFF / 30s / 60s / 90s
Disp EX ON Sen	NORMAL	Changes the brightness when lowering lights such as the combination meter indicator light, A/C indicator light, and clock light. Refer to the illustration *3.	LIGHT2 / LIGHT1 / NORMAL / DARK1/DARK2
Disp EX OFF Sen	NORMAL	Changes the brightness when lowering lights such as the combination meter indicator light, A/C indicator light, and clock light. Refer to the illustration *4.	LIGHT2 / LIGHT1 / NORMAL / DARK1/DARK2
DRL Function	ON	DRL control	ON / OFF

Illustration *1

Fig 1: Light Brightness Setting Chart

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Illustration *2

DISPLAY REFERENCE

Display	Brightness of the surrounding when lighting	Lighting delay	Delay of turning light off	**2
OLD	OLD logic	6 sec.	6 sec.	3 sec.
CRNT	New logic **1	15 sec.	15 sec.	15 sec.
HINT: 1: The new one has the logic to light up two times brighter than the old logic. 2: Delay time until the headlight is turned on when it suddenly gets dark.

Illustration *3

Fig 2: Brightness Setting Chart For Lowering Lights

Illustration *4

Fig 3: Brightness Setting Chart For Canceling Lowering Lights