Inspection Procedure
- READ VALUE USING TECHSTREAM (COMBINATION SWITCH)
- Check the DATA LIST for proper functioning of the combination switch.
Combination Switch
COMBINATION SWITCH DATA LISTTester Display Measurement Item/Range Normal Condition Diagnostic Note Front Fog Light Switch Front fog light switch signal / ON or OFF ON: Front fog light switch is in ON position
OFF: Front fog light switch is not in ON position- Passing Light Switch Passing light switch signal / ON or OFF ON: Headlight dimmer switch is in FLASH position
OFF: Headlight simmer switch is not in FLASH position- Dimmer Hi Switch High beam switch signal / ON or OFF ON: Headlight dimmer switch is in HI position
OFF: Headlight dimmer switch is not in HI position- Light Auto Switch Auto light switch signal / ON or OFF ON: Light control switch is in AUTO position
OFF: Light control switch is not in AUTO position- Head Light Switch Headlight control switch signal / ON or OFF ON: Light control switch is in HEAD position
OFF: Light control switch is not in HEAD position- Tail Light Switch Taillight switch signal / ON or OFF ON: Light control switch is in TAIL or HEAD position
OFF: Light control switch is not in TAIL or HEAD position- Turn Left Switch Turn signal switch LH signal / ON or OFF ON: Light control switch is in LH position
OFF: Light control switch is not in LH position- Turn Right Switch Turn signal switch RH signal / ON or OFF ON: Light control switch is in RH position
OFF: Light control switch is not in RH position- OK: ON (switch normal position) appears on the screen.
NG: REPLACE TURN SIGNAL SWITCH ASSEMBLY
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
- Check the DATA LIST for proper functioning of the combination switch.