FixVault
Home › Lexus › 2008 › SC 430 › Repair and Diagnosis › Body & Frame › Sun Roof/T-Top/Convertible Top › Convertible › Roof Position Limit Switch › Inspection

Roof Position Limit Switch: Inspection

  1. INSPECT SLIDE ROOF LIMIT SWITCH 
    1. Measure the resistance of the switch.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Not pushed 10 kΩ or higher
      Fig 1: Identifying Slide Roof Limit Switch
      G05294378Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the side roof limit switch.

  2. INSPECT SLIDE ROOF LIMIT SWITCH (ROOF CLOSE RH) 
    1. Measure the resistance of the switch.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Not pushed 10 kΩ or higher
      Fig 2: Identifying Slide Roof Limit Switch (Roof Close RH)
      G05294379Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the side roof limit switch.

  3. INSPECT SLIDE ROOF LIMIT SWITCH (ROOF CLOSE LH) 
    1. Measure the resistance of the switch.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Not pushed 10 kΩ or higher
      Fig 3: Identifying Slide Roof Limit Switch (Roof Close LH)
      G05294380Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the side roof limit switch.

  4. INSPECT NO. 1, NO. 2 ROOF POSITION SLIDE ROOF LIMIT SWITCH 
    1. Measure the resistance of the switch (roof position No. 1).

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Switch Condition Specified Condition
      1 - 3 Not pushed Below 1 Ω
      1 - 3 Pushed 10 kΩ or higher
      Fig 4: Identifying No. 1, No. 2 Roof Position Slide Roof Limit Switch
      G05294381Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the side roof limit switch.

    2. Measure the resistance of the switch (roof position No. 2).

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Switch Condition Specified Condition
      2 - 3 Not pushed Below 1 Ω
      2 - 3 Pushed 10 kΩ or higher

      If the result is not as specified, replace the side roof limit switch.

  5. INSPECT NO. 3 ROOF POSITION SLIDE ROOF LIMIT SWITCH 
    1. Measure the resistance of the switch.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Switch Condition Specified Condition
      1 - 2 Not pushed Below 1 Ω
      1 - 2 Pushed 10 kΩ or higher
      Fig 5: Identifying No. 3 Roof Position Slide Roof Limit Switch
      G05294382Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the side roof limit switch.

  6. INSPECT SLIDE ROOF LIMIT SWITCH (ROOF OPEN) 
    1. Measure the resistance of the switch.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Switch Condition Specified Condition
      1 - 2 Not pushed Below 1 Ω
      1 - 2 Pushed 10 kΩ or higher
      Fig 6: Identifying Slide Roof Limit Switch (Roof Open)
      G05294383Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the side roof limit switch (Roof open).

About FixVault