Front Stabilizer Bar: Installation
WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- INSTALL FRONT STABILIZER BAR
- Install the 2 bushes to the stabilizer bar.
- Install the stabilizer bar and 2 stabilizer bar brackets with the 4 bolts.
- STABILIZE SUSPENSION (See REASSEMBLY )
- INSTALL FRONT STABILIZER LINK ASSEMBLY LH
- Install the stabilizer link to the lower arm with the nut.
Torque: 113 N*m (1,150 kgf*cm, 83 ft.*lbf)
- Install the stabilizer link with the bolt and nut.
Torque: 51 N*m (520 kgf*cm, 38 ft.*lbf)
- Install the stabilizer link to the lower arm with the nut.
- INSTALL FRONT WHEEL
- Install the wheel with the 5 nuts.
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
- Install the wheel with the 5 nuts.
- INSTALL WHEEL HUB ORNAMENT SUB-ASSEMBLY
- Install the ornament with the 10 bolts.
Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
- Install the ornament with the 10 bolts.