FixVault
Home › Lexus › 2008 › SC 430 › Repair and Diagnosis › External Pages › Different car › Section 15 (Steering Column) › Power Tilt And Power Telescopic Steering Column System › Freeze Frame Data

Freeze Frame Data

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. FREEZE FRAME DATA 
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Check the freeze frame data by following the intelligent tester's display.
      ITEM DESCRIPTION CHART

      Item Measurement Item / Range (Display) Normal Condition Diagnostic Note
      TILT POS Current tilt position data/Min.: 0000 H (0 edge)
      Max.: FFFF H (65,535 edge)      		 7,000 to 9,000 H
      (28672 to 36864 edge)      		 -
      TELSC POS Current tilt position data/Min.: 0000 H (0 edge)
      Max.: FFFF H (65,535 edge)      		 7,000 to 9,000 H
      (28672 to 36864 edge)      		 -
      UP SW(MPX) Communication state of tilt up input by manual switch / ON or OFF ON: Tilt up is activated by manual switch
      OFF: Tilt up is not activated by manual switch      		 -
      DOWN SW(MPX) Communication state of tilt up input by manual switch/ ON or OFF ON: Tilt up is activated by manual switch
      OFF: Tilt up is not activated by manual switch      		 -
      SHORT SW(MPX) Communication state of telescopic short input by manual switch / ON or OFF ON: Telescopic short is activated by manual switch
      OFF: Telescopic short is not activated by manual switch      		 -
      LONG SW(MPX) Communication state of telescopic short input by manual switch / ON or OFF ON: Telescopic short is activated by manual switch
      OFF: Telescopic short is not activated by manual switch      		 -
      POWER VOLTAGE Voltage data of power supply / Min.: 0 V, Max.: 20 V Actual power supply voltage 10 to 14V -
      IG SW(MPX) Communication state of ignition switch / ON or OFF ON: Communication is normal
      OFF: Communication is interrupted      		 -
      IGSW Input state of ignition switch / ON or OFF ON: Input signal is normal
      OFF: Input signal is interrupted      		 -
      KEYSW(MPX) Communication state of ignition switch/ ON or OFF ON: Communication is normal
      OFF: Communication is interrupted      		 -
      BODY1 ECU INFO Communication state of body ECU signal/ OK or Interruption ON: Communication is normal
      OFF: Communication is interrupted      		 -
      SEAT ECU INFO Communication state of seat ECU signal/ OK or Interruption ON: Communication is normal
      OFF: Communication is interrupted      		 -
      COMBI ECU INFO Communication state of turn signal switch (combination switch) signal / OK or Interruption ON: Communication is normal
      OFF: Communication is interrupted      		 -
About FixVault