Fuel Pump Resistor: Installation

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FUEL PUMP RESISTOR
1. Install the fuel pump resistor with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
2. Connect the connector.
  
  Fig 1: Locating Fuel Pump Resistor With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.