Front Airbag Sensor: Removal

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (see AIRBAG SYSTEM ).

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE ENGINE UNDER COVER (See ON-VEHICLE INSPECTION )
REMOVE FRONT AIRBAG SENSOR LH
1. Disconnect the sensor connector.
2. Remove the bolt and sensor.
  
  Fig 1: Locating Front Airbag Sensor LH Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT AIRBAG SENSOR RH
1. Disconnect the sensor connector.
2. Remove the bolt and sensor.
  
  Fig 2: Locating Front Airbag Sensor RH Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002