Package Tray Trim: Inspection

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT PACKAGE TRAY TRIM ASSEMBLY

Disconnect the P8 tray motor connector.

Apply battery voltage to the tray motor terminal and check operation of the package tray trim.

Fig 1: Inspecting Package Tray Trim Assembly

MEASUREMENT CONDITION CHART

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2	Moves to CLOSE 2 position
Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1	Moves to CLOSE 1 position

If the result is not as specified, replace the package tray trim assembly.