Mass Air Flow Meter: Removal: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
WARNING:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE COOL AIR INTAKE DUCT SEAL See step 5
REMOVE ENGINE ROOM SIDE COVER RH See step 7
REMOVE MASS AIR FLOW METER

Fig 1: Identifying Mass Air Flow Meter
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disconnect the MAF meter connector.
2. Remove the 2 screws and MAF meter.
3. Remove the O-ring from the MAF meter.