FixVault
Home › Lexus › 2009 › IS 350 › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (2GR-FSE) (Service Information) › Integration Relay › Installation › Installation

Integration Relay: Installation: Installation

  1. INSTALL INTEGRATION RELAY 
    1. Connect the 3 connectors.
    2. Attach the integration relay to the engine room No. 2 relay block.
      Fig 1: Identifying Integration Relay
      GTY146359Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the No. 2 relay block cover.
  2. REMOVE ENGINE ROOM SIDE COVER LH  . Refer to INSTALLATION - Step 87
  3. REMOVE COOL AIR INTAKE DUCT SEAL  . Refer to INSTALLATION - Step 89
About FixVault