FixVault
Home › Lexus › 2009 › LS 460 AWD › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting › Console Box Light › Inspection

Console Box Light: Inspection

  1. INSPECT CONSOLE BOX LIGHT 
    1. LED illumination inspection
      1. Apply battery voltage to the terminals of the connector, and check the LED illumination condition.

        OK 

        Fig 1: Identifying Terminals RLMP, RGND And RRMP Of Console Box Light Connector
        G04944925Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        CONSOLE BOX LIGHT ILLUMINATION CONDITION

        Tester Connection Specified Condition
        10 (RRMP) - 3 (RGND) Rear spot light RH illuminates
        2 (RLMP) - 3 (RGND) Rear spot light LH illuminates
    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFIED CONDITIONS

      Tester Connection Switch Condition Specified Condition
      5 (RRSW) - 3 (RGND) Switch on both sides OFF 10 kΩ or higher
      4 (RLSW) - 3 (RGND) Switch on both sides OFF 10 kΩ or higher
      5 (RRSW) - 3 (RGND) Rear right side switch ON Below 1 Ω
      4 (RLSW) - 3 (RGND) Rear left side switch ON Below 1 Ω

      If the result is not as specified, replace the console box light.

      Fig 2: Identifying Terminals RLSW, RGND And RRSW Of Console Box Light Connector
      G04944926Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault