Inspection Procedure

CHECK FOR DTC (CAN COMMUNICATION SYSTEM)
1. Check for DTCs related to the CAN communication system (see DIAGNOSIS SYSTEM ).
  OK:
  
  DTC is not output.
  
  NG: GO TO CAN COMMUNICATION SYSTEM (See CAN COMMUNICATION SYSTEM )
  
  OK: Go to next step
CHECK FOR DTC
1. Delete the DTC (see DTC CHECK/CLEAR ).
2. Check for the DTC again (see DTC CHECK/CLEAR ).
  OK:
  
  DTC is not output.
  
  NG: REPLACE SKID CONTROL ECU ASSEMBLY (See REMOVAL )
  
  OK: END