FixVault
Home › Lexus › 2009 › LS 460 AWD › Repair and Diagnosis › External Pages › Different car › Section 175 (Air Conditioning (Service Information)) › Infrared Ray Sensor › Installation › Installation

Infrared Ray Sensor: Installation: Installation

WARNING: This page is about a different car, the 2010 Lexus LS 460L and 2010 Lexus LS 460. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL AIR CONDITIONING INFRARED RAYS SENSOR 
    Fig 1: Identifying Air Conditioning Infrared Rays Sensor Clamp And Screw
    GTY152973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Attach the clamp to install the sensor.
    2. Install the 2 screws.
    3. Apply new tape.
  2. INSTALL ROOF CONSOLE BOX ASSEMBLY 
    Fig 2: Identifying Roof Console Box Assembly Clips And Claws
    GTY133446Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Connect the 2 connectors, and then attach the 6 clips and 2 claws to install the roof console box.
    2. Install the 2 screws.
      3. Fig 3: Identifying Spot Light Lens Claws
      GTY152820Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Attach the 4 claws to install the spot light lens.
  3. PERFORM AIR CONDITIONING INFRARED RAYS SENSOR OPERATION 
    1. Operate the air conditioning infrared rays sensor to recognize it in the ECU.
      1. Turn the engine switch on (IG) so that the air conditioning amplifier recognizes the infrared rays sensor.
        NOTE:

        After removing and installing the infrared rays sensor, if the infrared sensor is not operated once, the ECU cannot detect the presence of an infrared rays sensor.

About FixVault