Park/Neutral Position Switch: Inspection

INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

Measure the resistance according to the value(s) in the table below.
Standard Resistance

RESISTANCE REFERENCE

Tester Connection	Condition	Specified Condition
6 (PL) - 2 (RB)	Shift lever in P	Below 1 Ω
6 (PL) - 2 (RB)	Shift lever not in P	10 kΩ or higher
1 (RL) - 2 (RB)	Shift lever in R	Below 1 Ω
1 (RL) - 2 (RB)	Shift lever not in R	10 kΩ or higher
9 (NL) - 2 (RB)	Shift lever in N	Below 1 Ω
9 (NL) - 2 (RB)	Shift lever not in N	10 kΩ or higher
7 (DL) - 2 (RB)	Shift lever in D	Below 1 Ω
7 (DL) - 2 (RB)	Shift lever not in D	10 kΩ or higher

Fig 1: Identifying Park/Neutral Position Switch Assembly

G04948461

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the switch assembly.