Mayday Ecu: Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL MOBILE PHONE BRACKET 
   1. Install the 2 mobile phone brackets with the 4 bolts.
      Fig 1: Identifying Bolts And Mobile Phone Brackets

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL MAYDAY ECU 
   1. Install the ECU with the nut.
   2. Connect the 4 connectors.
   3. Attach the 2 clamps.
   Fig 2: Identifying Mayday ECU Connectors And Clamps
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH  (See INSTALLATION )
4. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH  (See INSTALLATION )
5. INSTALL REAR FLOOR FINISH PLATE  (See INSTALLATION )
6. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT  (See INSTALLATION )
7. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (w/o Rear Cooler)  (See INSTALLATION )
8. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY  (See INSTALLATION )
9. INSTALL DECK TRIM SIDE BOARD LH  (See INSTALLATION )
10. INSTALL DECK TRIM SIDE BOARD RH  (See INSTALLATION )
11. INSTALL ROPE HOOK  (See INSTALLATION )
12. INSTALL ROPE HOOK ASSEMBLY  (See INSTALLATION )
13. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  (See INSTALLATION )
14. INSTALL NO. 1 COOLER COVER  (See INSTALLATION )
15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
16. INSTALL COWL TOP VENTILATOR LOUVER RH  (See INSTALLATION )
17. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
       NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
18. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
19. PERFORM REGISTRATION 
    1. Perform registration (see REGISTRATION  ).
       NOTE: When replacing the mayday battery or the mayday ECU assembly (together with mayday battery), perform registration.