FixVault
Home › Lexus › 2009 › LS 460L AWD › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting › Back Door Courtesy Switch › Installation

Back Door Courtesy Switch: Installation

  1. INSTALL LUGGAGE DOOR CLOSER ASSEMBLY 
    1. Connect the connector.
    2. Install the luggage door closer with the 3 bolts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

      Fig 1: Identifying Luggage Door Closer Assembly Bolts
      G04944983Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL BACK DOOR TRIM COVER  (See INSTALLATION )
  3. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH  (See INSTALLATION )
  4. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH  (See INSTALLATION )
  5. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH  (See INSTALLATION )
  6. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH  (See INSTALLATION )
  7. INSTALL NO. 2 COURTESY LIGHT ASSEMBLY  (See INSTALLATION )
  8. INSTALL SWITCH BEZEL (w/ Power Trunk Lid System)  (See INSTALLATION )
  9. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP  (See INSTALLATION )
About FixVault