FixVault
Home › Lexus › 2009 › LS 460L RWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle (Aa80E) › Floor Shift Assembly › Inspection

Floor Shift Assembly: Inspection

  1. INSPECT TRANSMISSION CONTROL SWITCH 
    1. Measure the resistance between each terminal of the shift lock control unit assembly when the shift lever is moved to each position.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Tester Connection Shift Lever Position Specified Condition
      3 (IG) - 7 (S) S, "+" and "-" Below 1 Ω
      2 (SFTU) - 5 (E) Continuously shift to "+" (Up-shift) Below 1 Ω
      1 (SFTD) - 5 (E) Continuously shift to "-" (Down-shift) Below 1 Ω
      3 (IG) - 7 (S) Not on S, "+" and "-" 10 kΩ or higher
      2 (SFTU) - 5 (E) S 10 kΩ or higher
      1 (SFTD) - 5 (E) S 10 kΩ or higher
      Fig 1: Identifying Transmission Control Switch Connector Terminals
      G06187068Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the resistance value is not as specified, replace the transmission floor shift assembly.

About FixVault