Object Recognition Camera: Installation: Installation

HINT: 

A bolt without a torque specification is shown in the standard bolt chart. Refer to SPECIFIED TORQUE FOR STANDARD BOLTS .

1. INSTALL OBJECT RECOGNITION CAMERA 
   Fig 1: Identifying Object Recognition Camera Location

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   1. Attach the clip to the camera, and temporarily install the camera with the 3 bolts.
   2. Tighten the bolts in the order shown in the illustration.
   3. Connect the wire harness.
   4. Connect the camera connector.
2. INSTALL REAR INNER VIEW MIRROR ASSEMBLY  . Refer to INSTALLATION - Step 1
3. INSTALL RAIN SENSOR COVER  . Refer to INSTALLATION - Step 2
4. INSTALL MAP LIGHT ASSEMBLY  . Refer to INSTALLATION - Step 41
5. ADJUST OBJECT RECOGNITION CAMERA  See step  1