FixVault
Home › Lexus › 2009 › LS 600hL › Repair and Diagnosis › External Pages › Different car › Section 1 (Fuel) › Fuel Pressure Sensor › Removal

Fuel Pressure Sensor: Removal

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCHARGE FUEL SYSTEM PRESSURE 
    1. Discharge fuel system pressure (see PRECAUTION  ).
  2. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold (See REMOVAL ).
  3. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY  (See REMOVAL  )
  4. REMOVE FUEL PRESSURE SENSOR 
    1. Disconnect the sensor connector.
      2. Fig 1: Locating Fuel Pressure Sensor Connector
      G04947995Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the sensor and gasket
About FixVault