Fuel Pump Resistor: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FUEL PUMP RESISTOR
1. Install the resistor with the bolt
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
  
  Fig 1: Locating Resistor With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the resistor connector
INSTALL ENGINE ROOM SIDE COVER LH (See INSTALLATION )