FixVault

Differential Oil: Replacement

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN DIFFERENTIAL OIL 
    1. Stop the vehicle on a level place.
    2. for Front Differential:
      1. Using a 10 mm hexagon wrench, remove the filler plug and gasket.
      2. Using a 10 mm hexagon wrench, remove the drain plug and gasket, and drain the oil.
      3. Using a 10 mm hexagon wrench, install a new gasket and the drain plug

        Torque: 39 N*m (398 kgf*cm, 29 ft.*lbf) 

        Fig 1: Locating Front Differential Drain And Filler Plugs
        G05781197Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. for Rear Differential.
      1. Using a 10 mm hexagon wrench, remove the filler plug and gasket.
      2. Using a 10 mm hexagon wrench, remove the dram plug and gasket, and drain the oil.
      3. Using a 10 mm hexagon wrench, install a new gasket and the drain plug.

        Torque: 49 N*m (500 kgf*cm, 37 ft.*lbf) 

        Fig 2: Locating Rear Differential Drain And Filler Plugs
        G05781198Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. ADD DIFFERENTIAL OIL 
    1. for Front Differential:
      1. Add differential oil so that the oil level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the differential filler plug hole
        NOTE:
        • Too much or too little oil will lead to differential problems.
        • After changing the oil, drive the vehicle and then check the oil level again.
          Fig 3: Identifying Front Differential Oil Level
          G05781199Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        Oil type: 

        Toyota Genuine Differential Gear Oil LT 75W-85 GL-5 or equivalent. 

        Capacity: 

        0.7 to 0.8 liters (0.74 to 0.84 US qts., 0.62 to 0.70 lmp. qts.) 

      2. Using a 10 mm hexagon wrench, install a new gasket and the filler plug.

        Torque: 39 N*m (398 kgf*cm, 29 ft.*lbf) 

        Fig 4: Locating Front Differential Filler Plug
        G05781200Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. for Rear Differential.
      1. Add differential oil so that the oil level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the differential filler plug hole.
        NOTE:
        • Too much or too little oil will lead to differential problems.
        • After changing the oil, drive the vehicle and then check the oil level again.
          Fig 5: Identifying Rear Differential Oil Level
          G05781201Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        Oil type: 

        Toyota Genuine Differential Gear Oil LX 75W-85 GL-5 or equivalent 

        Capacity: 

        1.3 to 1.4 liters (1.38 to 1.47 US qts., 1.15 to 1.23 lmp. qts.) 

      2. Using a 10 mm hexagon wrench, install a new gasket and the filler plug.

        Torque: 49 N*m (500 kgf*cm, 36 ft.*lbf) 

        Fig 6: Locating Rear Differential Filler Plug
        G05781202Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002